POWERPEDIA
All about power electronics
Battery Equivalent Circuit Model (ECM)
Battery Equivalent Circuit Models (ECMs) use resistors and capacitors to represent a battery’s dynamic behaviour and is commonly used for efficient simulation and BMS control design.

Battery Equivalent Circuit Model (ECM)
The Battery Equivalent Circuit Model (ECM) is a simplified representation of a battery’s dynamic behaviour using electrical components such as resistors and capacitors. ECMs are widely used in BMS algorithms, battery simulation, and HIL systems due to their balance of accuracy and computational efficiency.
Definition and Purpose
An ECM mimics the voltage, current, and transient response of a battery during charge and discharge cycles. Instead of modelling complex electrochemical reactions, it abstracts battery behaviour into circuit elements:
\[
V_{\text{terminal}}(t) = V_{\text{OC}}(t) – I(t) \cdot R_{\text{total}} – V_{\text{transient}}(t)
\]
Vterminal: Output voltage of the batteryVOC: Open-circuit voltage (dependent on SOC)I(t): Instantaneous currentRtotal: Internal resistance (may include multiple resistive components)Vtransient: Voltage drop due to RC dynamics
Common ECM Structures
Rint Model
Simplest form with one resistor and a voltage source:
\[
V(t) = V_{\text{OC}}(t) – I(t) \cdot R_{\text{int}}
\]
Thevenin Model (1RC)
Adds a parallel RC branch to capture dynamic response:
\[
V(t) = V_{\text{OC}} – I(t) \cdot R_0 – V_{RC}(t)
\]
\[
\tau = R_1 \cdot C_1, \quad \frac{dV_{RC}}{dt} = -\frac{V_{RC}}{\tau} + I(t) \cdot R_1
\]
Dual RC Model (2RC)
Further improves accuracy by adding a second RC pair:
\[
V(t) = V_{\text{OC}} – I(t) \cdot R_0 – V_{RC1}(t) – V_{RC2}(t)
\]
State-Space Representation
ECMs are often implemented in control systems using a state-space model:





